Battery maintenance for electric forklifts

Battery maintenance procedure for electric forklifts

Almost all electric forklifts of different brands use battery packs with voltage: 24, 36, 48VDC, and the capacity depends on the capacity of the vehicle, the Aqui container, how many batteries can be used. battery to the connector (basic rule of battery connection: series connection => increase voltage, parallel connection => increase current).

Aqui used for forklifts can be diluted battery, dry battery, so the use and storage are also slightly different. The use time of the battery depends on the number of times of charging, as well as the care regime such as not letting the solution be too exhausted, the charging current is too large, working temperature, storage … Here are the basic rules to pull. Long battery life

Batteries that are attached to a vehicle need to be properly maintained for a long time to be used. It is necessary to periodically check about once every 2 months, including the following tasks: checking the level of solution in the compartments and replenishing, checking the cleanliness of the battery piles, recharging the battery with a charger…

Do not let the solution level in the flasks drop below the LOWER line, only distilled water can be used for replenishment. Before removing the covers, clean the outside of the battery to avoid getting dirt into the compartments of the battery.

Recharge the battery when it is found that the battery is low (for example, can not start the machine…) or after adding distilled water to the tank. The charging current is 1/10 of the tank capacity (see item c part 3 above), however the refill time depends on the actual measured solution density (using commercially available hydrometer tubes) . Need to remove the battery from the car when recharging, remove the negative (-) wire first, the positive (+) after.

The time required to recharge a battery is based on the actual measured density of that battery and is applied according to the following calculation:

Factor 1.2 ~ 1.5 added to ensure the battery is fully charged compared to the specified time.

For example, a 12V-5Ah battery has an actual density of 1.20, so: Discharge discharge is: 5Ah.(1.280-1.200): 0.2 = 1.5A

Time  required reload is: 1.5×1.2: 0.5 =  3.6 (hours)

Note: Do not cover the covers of the battery compartments (chambers) while charging.

When installing the battery on the car, install the positive wire first, negative after. Apply a little grease to the pitchers for protection.

For electric forklifts, the battery is the main source of energy, so if you want your electric forklift to work well, always in a ready-to-service position, we must regularly check and maintain it even when it is not. the forklift has not been in operation for a long time

 

 ,

22 responses to “Battery maintenance for electric forklifts”

  1. Bảo dưỡng acqui cho xe nâng điện | Bán xe nâng, phụ tùng xe nâng, thiết bị nâng hạ và dịch vụ kỹ thuật

  2. Chào công ty
    Bên tôi có chiếc xe nâng máy dầu hiệu Komatsu tải trọng 2 tấn, xe đã không sử dụng hơn 1 năm nay. Hôm qua chúng tôi kiểm tra để cho xe chạy lại, nhưng khởi động máy không được. Vậy công ty mình có thể cho kỹ thuật đến xem giúp chúng tôi được không? Cty chúng tôi ở Phước Long

    Xin cảm ơn!

    • Chào anh Hóa
      Vâng thông tin của anh chúng tôi đã chuyển cho người phụ trách khu vực này của công ty chúng tôi sẽ liên lạc lại và hỗ trơ mình nhé

      Cảm ơn anh

Leave a Reply

Your email address will not be published. Required fields are marked *

Related posts

  • xe-nang-cang Forklifts commonly used in ports

    Types of Forklifts commonly used in ports In ports, there is a range of forklifts used for loading and unloading cargo and performing other transportation activities. Below are some common types of forklifts often used in ports: Reach Stacker: A reach stacker is a type of forklift capable of stacking containers on top of each […]

  • reachtruck What is Reach truck? Address to rent and buy cheap

    What is Reach truck? Address to rent and buy cheap prestigious Reachtruck forklifts Reach trucks are forklifts used in warehouses and factories to move goods from one place to another. The name “Reach truck” comes from its ability to “reach” to high and narrow locations to pick up or place goods. It is considered one […]

  • sua-chua-bao-tri-xe-nang-cont Reach stacker Maintenance Service

    Reach stacker Maintenance Service In today’s modern logistics world, container forklifts play an essential role. They are the backbone of transporting and stacking goods at seaports, depots, and distribution centers. However, to maintain high performance and extend the lifespan of these “machines,” regular maintenance is crucial. Samcovina Corporation is proud to be a leading provider of professional container forklift maintenance services, ensuring continuous and efficient operations for your business. Overview of Container Forklifts Container forklifts are specialized equipment designed to lift, lower, and move containers in seaports, depots, and industrial areas. There are various types of container forklifts such as reach stackers, straddle carriers, and forklift trucks. Each type has its own advantages and is suitable for different working environments. Regular maintenance plays a crucial role in maintaining the performance and safety of container forklifts. A good maintenance program not only helps detect potential issues early but also ensures that the forklift is always in optimal operating condition, thereby increasing productivity and minimizing the risk of workplace accidents. Samcovina’s Container Forklift Maintenance Service Samcovina offers comprehensive maintenance packages including: – Regular maintenance according to manufacturers’ recommendations – Inspection and replacement of excessively worn parts – Maintenance of hydraulic and electrical systems – Calibration and adjustment of control systems Our professional maintenance process includes: – Comprehensive inspection – Data analysis of operations – Maintenance execution based on standard checklists – Post-maintenance checks and detailed reports Our team of technicians at Samcovina is well-trained with certifications from leading forklift manufacturers worldwide. They not only have technical expertise but also practical experience to ensure that all maintenance tasks are carried out accurately and efficiently. Benefits of Using Samcovina’s Maintenance Service Increase lifespan and performance of forklifts: Regular maintenance helps detect and address issues early on, preventing major breakdowns and extending the lifespan while maintaining high performance. Minimize downtime: With carefully planned maintenance schedules, we help you avoid unexpected breakdowns, reducing unnecessary downtime. Long-term cost savings: Investing in regular maintenance helps avoid large repair costs in the future while optimizing fuel efficiency, providing long-term economic benefits. Modern Technology & Equipment Samcovina prides itself on having advanced diagnostic systems that can detect potential issues before they become serious. We use advanced maintenance management software to track maintenance history, predict future maintenance needs, and optimize work processes. Moreover, Samcovina only uses genuine spare parts to ensure quality and perfect compatibility, contributing to maintaining the highest performance and safety standards for your container forklift. Quality Commitment & Customer Service We are committed to providing the highest quality service with clear warranty policies for all maintenance tasks. Our technical support team is available 24/7 to answer any questions or handle emergency situations. Additionally, Samcovina offers training programs for customers’ operators to help them master safe and efficient operation skills while recognizing early signs that require maintenance. Samcovina Corporation – Reliable Partner Providing Genuine Spare Parts In addition to professional maintenance services, Samcovina is a reputable distributor providing genuine spare parts for leading global brands of container forklifts. We are proud to be official partners with many renowned manufacturers guaranteeing high-quality spare parts that meet all customer repair needs. Diverse range of spare parts available for top brands: – Kalmar: We supply a full range of spare parts for Kalmar’s line of forklifts from engine components to complex hydraulic systems. We ensure perfect compatibility and high performance across all Kalmar models. – Konecranes: As a Konecranes partner, we provide genuine spare parts across their product range including reach stackers, straddle carriers, and forklift trucks. Customers can trust the quality and durability of each component. – Fantuzzi: Despite Fantuzzi merging into Terex Port Solutions, we continue to supply reliable spare parts for older Fantuzzi models ensuring effective operation. – Linde: We offer genuine spare parts across Linde’s line known for advanced technology & high performance ensuring every detail meets manufacturer standards. – Hyster: With a diverse range ]

  • xe-cho-thue What information do forklift hirers need to know?

    What information do you need to know when renting a forklift? When buying or renting a forklift, knowing how to choose the right forklift for the job requires you to have in-depth knowledge if you want to find the most efficient forklift for the job you need while also saving money. most cost effective. In […]

  • Pin-Lithium-ion What types of batteries are used in electric forklifts?

    What types of batteries are used in electric forklifts? Acid-lead battery: This is the most common type of battery used in electric forklifts. Acid-lead batteries provide stable energy supply and have a low cost. However, they require regular maintenance, careful attention to full charging, and avoiding over-discharging. Lithium-ion battery: This type of battery has advanced […]